layers

Reed Creek Watershed final

2008-05-12T23:50:00.003-04:00

Bolstad Chapter 11 Terrain Analysis

2008-05-12T22:48:00.003-04:00

Terrain analysis is important in GIS because terrain dictates how water flows and where it collects, how much sunlight hits a place throughout the day/year, and what can be seen from where in different landscapes. DEMs provide important information about terrain: hillshade, slope, and aspect can be derived from this type of data. It's also possible to determine flow through and watershed boundaries for hydrologic functions with a DEM. When working with this raster data we can use 3D analyst or spatial analyst extensions.

Terrain Analysis

2008-04-21T11:59:00.003-04:00

Spatial Analysis

2008-04-14T11:45:00.005-04:00

Topics in Raster Analysis (Chapter 10 Bolstad)

2008-04-07T11:12:00.004-04:00

Although most people work with vector-based data, raster-based data allows for different types of analysis which can be very cool; for example, site suitability analysis which might use DEMs and slope models are nicely suited for real-world visualization and modeling.

Reviewing....raster is a simple data structure made up of cells on a grid. Each cell has one value (ex- one elevation value per cell; if the resolution is 20' then the cell doesn't represent anything more detailed than those 20'). Raster uses much larger file sizes but it is a simpler file structure. The smaller the cell size, the higher the resolution which equals a bigger file!!!

Okay, on to the new stuff again: map algebra is a cell by cell combination of raster data layers. You can perform different functions on the data such as + - * / but that depends on which software you have. Problems can pop up relating to different cell sizes and overlapping, but you can 'resample' to achieve like size cells.

Other types analysis are local (using only 1 cell), neighborhood (cell with surrounding) and global (using the whole raster layer) to look at different raster layers. Local functions use the raster calculator for spatial analysis, and we can also reclassify (this is not worded correctly, i think) Reclassification simplifies data and it reminds me of 'dissolve'.

Chapter 9 Spatial Data Analyses

2008-04-07T11:07:00.004-04:00

Spatial data analysis is related to geoprocessing and takes place with geoprocessing tools in ArcToolbox. Some of the functions are:
clip-
overlay-
amend/merge-
overlay options- where we get a lot of analysis in; combine spatial and attribute data

And now, a word about buffering: a buffer is an area drawn around a feature at a uniform distance. It usually represents an important area (maybe a floodplain, a protected species habitat, or a service area for a city). The features which lay inside the buffer have different status than the features which lay outside the buffer.

Chapters 10 & 11

2008-04-07T11:04:00.002-04:00

Chapter 8 Bolstad- Attribute Data and Tables

2008-03-23T23:16:00.000-04:00

Attribute data is the information that describes the non-spatial properties of objects. They are usually presented in tables with fields (vertical) and records (horizontal). This data summarizes the most important non-spatial characteristics of mapped elements. For an attribute table of counties, the fields might include the county name, population, area, and population density. Values for all of these attributes can be collected and presented in a table. It is then possible to conduct selections or queries on the data for analysis.

Joining & Relating

2008-03-11T23:51:00.002-04:00

Chapter 6: Aerial and Satellite Images

2008-03-10T11:07:00.005-04:00

Remote sensing involves measuring an object from a distance, either via a plane or a satellite. We use photographic or satellite images to gather spatial data. This data is based on the electromagnetic energy spectrum which is energy emitted from the sun. Sensors capture this energy when it is reflected.

Some advantages of this type of information are:
-raster based
-provides detailed geometrically accurate record (can take out distortion)
-broad area coverage

Two main types of distortion are terrain displacement and camera tilt. Both of these can be corrected. Orthophotography is the term for photos that have had distortion taken out.

Bent Creek Trails

2008-03-05T23:17:00.002-05:00

Bolstad Chapter 4- Data Sources and Data Entry

2008-02-26T23:32:00.000-05:00

There are many sources of spatial data which can be divided into 2 forms: hardcopy and digital. Hardcopy forms include any drawn, written, or printed documents and were the most common storage for spatial data until the 1980s when GIS came onto the scene in a major way. Digital forms of spatial data are those in computer-compatible format. Digital data are often from hardcopy maps that have been converted over to digital format. The chapter goes into specifics about the process of digitizing data.

This chapter also talks about different types of maps such as feature, choropleth, dot-density, and isopleth (or contour) maps as well as map scale and map generalization.

Chapter 19

2008-02-19T23:02:00.002-05:00

Digital data

2008-02-17T22:07:00.005-05:00

This is a summary of the Chapter 7 lecture on digital data.

There are 4 things we need to consider with digital data:
1. who produces the data?
2. is it vector or raster data?
3. what is the scale and accuracy of the data?
4. what is the content of the data?
* also, data is not usually in the shape and size you need. have to manipulate it for your purpose.

There are many different digital data sources:

* NLCD (National Land Cover Datasets)
*DRG (Digital Raster Graphic)
*DLG (Digital Line Graphs)
*DOQ (Digital Orthophoto Quads)
*National Wetlands Inventory (NWI)
*Digital Soils Data

*DEM (Digital Elevation Models)- these are really neat; raster data set, resolution is down to 20' b.c of recent flooding and the need to better map flood zones, each cell has a value of elevation, derived from LIDAR, it's the highest resolution data we've ever had for elevation-type stuff, *hillshade is cool*

*Buncombe County Digital Data?

* TIGER/Census data (Topologically Integrated Geographic......)

Chapter 13

2008-02-17T21:51:00.002-05:00

Chapter 3 lecture

2008-02-09T23:03:00.001-05:00

This lecture kinda blew my mind; it was the first time I'd ever heard the word datum before (that I know of). So a lot of terminology and concepts were new and somewhat intimidating. But now that I've done the ESRI tutorial, read some in the book, and gone over my lecture notes again... I'm starting to get it. It really did take 3 times of pouring over the same information, but in different formats, for it to sink in. The sinking in part is exciting though, and here's a very brief summary of some things, but not everything.

Geodesy is the study of the size and shape of the Earth. Sounds simple enough- but it's not! There are spheroids and ellipsoids involved (apparently the same thing) which are smooth mathematical models of the Earth, while a geoid is a geographic model of the Earth which approximates gravitational pull. Datums are a set of coordinate locations which have been measured horizontally or vertically and tell us the latitude and longitude of a set of points on an ellipsoid. Also called a reference surface. Some common ones are NAD 27 and NAD 83. Projecting maps is whole other monster which always involves distortion of one or all of these: shape, area, distance, and direction. Here in the US we are likely to use either the Lambert Conformal Conic or the Universal Transverse Mercator projections. Counties often use State Plane as their projection of choice. North Carolina only has one state plane, but many states have more than one. Now I need to study for tomorrow's test...

Oregon

2008-02-03T23:02:00.001-05:00

Chapter 2 lecture

2008-01-30T21:00:00.001-05:00

I'm going to rewrite my notes from class here to get things to sink in.

Data Models
On Monday we had a lecture on data models! These exciting things include objects in a spatial database plus the relationship among these objects. We work basically with 2 types of data models: vector and raster. Also with Triangulated Irregular Networks (TIN) but not as much.

Vector data models use coordinates (x,y) the "where" and attribute data (descriptive info about features) the "what" to define discrete objects- things with definite starting and stopping points. The three types of vector objects are points, lines, and polygons. Points might represent a light pole, gas wells, a tree, survey points. Attribute data are associated with each point and describe the non-spatial characteristics of the points. Lines might represent roads or rivers. They are usually represented as sets of coordinates. Attributes can be associated with the whole line, line segments, or nodes (starting and stopping points of line). Polygons can represent parks, buildings, or counties and are created by a set of connected lines. Attribute data can include perimeter, land cover type, or county name. (Representation depends on many things, including detail, accuracy, and use of data.) Vector data models are complex data structure defined by many x,y coordinates.

Vector data can be topological, which definitely doesn't mean topographic. Topology refers to the spatial relationships among features. It is a branch of geometry that I've not heard of before today. It makes up the rules that allow us to work in GIS. Words such as "connected, adjacent, and contained" are associated with topology. Computers need topology because they don't have experiences to make connections nor do they have nifty intuition so they need rules.

On to raster data models....they are simple data structure, work with jpeg formatting (digital photographs), involve continuous spatial features such as precipitation, elevation, and slope. They define the world in a regular grid pattern with a regular set of cells. Each cell has the same dimensions. "The phenomena or entities of interest are represented by attribute values associated with each cell location" (Bolstad 40). Usually each cell has one value; it is a minimum mapping unit and it cannot map anything smaller. If water and land exist in the same cell, the computer will decide which value to assign to the cell. The book explains that there is a trade off with raster data sets dealing with spatial data and data volume. Talks more on 41. Resolution and pixels come into play the raster data. Downtown Asheville is mapped at 6" resolution which apparently is very good.

Most data may be represented in either raster or vector models and can be converted between the two.

Triangulated Irregular Networks are good for representing surfaces, like elevation. Actually uses vector data generated from coordinates. Starts with points, then connects them to form a connected network of triangles. More on 50 and 51.

Data Formats
We use specific data formats to store and display information. Examples are .doc (text, images) .txt (text only, easier and quicker to open, don't need MS word). All have advantages and disadvantages. Spatial data formats are no different:

A geodatabase is a central storage location for all GIS data and relationships among them.
1. personal database (.mdb)
2. file based database (.gdb) *preferred*
3. scalable geodatebases (3)

My notes get fuzzy here, I should ask some clarification questions before I continue.

Second Assignment

2008-01-27T21:16:00.001-05:00

Once I got the proper layers up in the data frame it was smooth sailing to complete the map displayed here. I must have moved or generally messed up something while working on the other ArcCatalog exercises because when I tried to open Ex 4c only one layer (flight path) showed. The other layers did not have check marks next to them, but there was a red exclamation mark next to the boxes where the check marks usually live. After much trial and error to correct this plus some advice from the help desk, I closed the program, took a break, came back to start from scratch and Ex 4c opened without a hitch! Not sure what happened there; just happy it's done now. Off to do some reading in Chapter 2.

The Blue One

2008-01-26T23:18:00.001-05:00

Almost there, but not quite

2008-01-21T23:42:00.000-05:00

First Assignment

2008-01-21T23:32:00.000-05:00

The assignment went really well except for a couple of things that nearly led to a meltdown. 1.) That measuring tool in the second exercise wouldn't behave for me! Hence the 2nd map is not complete. 2.) Saving my maps and then exporting them to jpegs was a little tricky for my somewhat retarded computer skills but I felt wonderfully accomplished once I saw them displayed on my blog. The directions provided in the lab book were very clear and simple and, in turn, very manageable for this beginner. All of the basic computer information presented in class about saving and organizing files, jpegs and comparing ArcCatalog to Windows Explorer really helped me. I need all of that.

First Day

2008-01-14T20:52:00.000-05:00

So far, so good: I've got my books, a brand-spankin' new blog, and lots of curiosity about gis. Let's see what happens...